To reverse around a corner you should have
around half a metre (Steering Wheels width) of space free between the car and the kerb. Start from a position 2 car lengths past the corner.
When pulling up, if a signal is necessary, avoid misleading others by timing the signal so you are just passing the road on the left.
Always ensure you are reversing from a major road into a minor road. To reverse from a minor road onto a major road could be very dangerous.
make sure you Prepare, Observe and Move -
in that order. Use the handbrake to prevent the car from rolling. Take effective all-round observations, including both blindspots. Before beginning to move, you should be looking over your left
shoulder, through the rear window.
Going backwards around a corner is similar
to going forwards. The biggest difficulty going backwards is knowing how much to steer as it is harder to see the kerb. Plan your point of turn - when the back if the car is level
with the start on the corner.
Some people prefer to watch the kerb over their left shoulder, through the side windows of the car. Others find it easier to use the left mirror to follow the kerb. Whichever method you use, you must remember to keep checking all around and to look out the back window regularly for other road users. Keep very slow.
The front of the car will swing out
towards the right when you turn, so make sure you look round and check on the right side (including the blindspot) before you steer.
Just like going forwards around a corner, you should start to turn the wheel when the kerb starts moving away from you. Follow it round and straighten up as the car becomes straight in the new road.
Reverse straight back into the new road for
a good 2 car lengths. Keep slow, keep checking all around, and try to keep a steady distance from the kerb. When finished, there should be plenty of space available for others to pass and to use the
Engage the handbrake and select neutral.